Specialty & Ball Valve Engineering, Inc.Specialty & Ball Valve Engineering, Inc.
If you can not find it... We'll design & build it.


SBVE high pressure valves are available with a wide range of commercial or military grade air, electro-mechanical or hydraulic actuators.

Pneumatic Actuators
Energized by shop air or bottled gas. Solenoid operated.
Optional Features:
Position Switches
Potentiometer for continuous position indication
Adjustable stroke limiter
Double acting or spring return
Fail-safe positioning
Manual override

Electro-Mechanical Actuators
Aerospace, marine or industrial types for quiet, compact, lightweight operation.
Optional Features/Optional Actuators:
Choice of many AC or DC voltages
NEMA 4 (weatherproof) enclosures
NEMA 7/9 (explosion proof) enclosures
Up to 4 extra limit switches
Potentiometer for continuous position indication
Variable speed control (2-50 seconds)
Fail-safe positioning
Thermal Overload protection
Space heater for cold or damp locations
Manual override

Ema Family
(Electro-Mechanically Actuated)

(L) Same valve w/ full servo control system. Rate and position programmable to minimize opening turbulence and noise
(R) Simple 2 Position, 1/2 inch bore, 5 ksi valve, 28 VDC w/overtravel limit switches
(M) High torque EMA (motor and gearbox - no valve), 21,000 inch-pounds torque capacity
(85 pounds as shown)

 

21,000 EMA w/Titanium test Shaft & Load Wheel

FEA analysis used to minimize weights

  • Shaft = 6.5 lbs
  • Wheel = 9.5 lbs
  • SBVE offers FEA analysis as contract service

 

5ksi Air Valves

  • Body size is 10 x 10 x 10 inches
  • Top laded w/bolt-on flanges
  • Manual and air actuated versions

3-To-1 Manual Gearbox On

2 inch Valve

  • 6000 PSI Helium service.
  • One piece body w/NASA style flanges
  • Equipped with interior "Bleed" circuit to allow pressure equalization

Air Operated Ball Valve

  • 100 psi shop air controls 5ksi mini-ball valve

Select the best features for your application and then contact an SBVE applications engineer who will help you specify the right actuator for your job.

Note: SBVE will assist you in the critical task of system design to assure safe, trouble-free performance. However, materials selection, compatibility, adequate ratings, proer installation, operation and maintenance are ultimately the responsibility of the customer and end user.


Home
Products
Home
Home
Home
Home
Home
Home
Home
Home
Home

Other
Data Sheet

Company Information
Stie Map
Profile border=
News
Contact

Specialty & Ball Valve Engineering, Inc. SBVE
1322 Bell Ave. Suite 1-J Tustin, CA 92780
Phone: 714-258-SBVE(7283)   Fax: 714-258-7284